Skip to main content

Sage Titanium Optimator

Sage Titanium Optimator
Sage Titanium Optimator Mountain Frame in Custom Color
$6,000.00
Please select options

Details

Sage Titanium Logo


XC RACE BIKE: THE REFINED RIPPER


The gun fires. The race has begun. It’s an all-out sprint to make it to the first chokepoint on the course before the inevitable bottleneck will occur. Elbows out, head down, eyes focused straight ahead, your desire is to get to the singletrack without any delay. You split riders as you sprint past them for that small place visible up the trail, and once you have gained your position the real race begins.


The Optimator was designed to be a World Cup level XC race bike. Using inspiration from the current XCO World Cup Courses that the top professionals ride, Optimator has one purpose and that is to get you to the line first. A 69.5° head angle combined with an 83mm Trail figure will keep you on your toes as you are able to navigate the most technical sections of the course due to the agile steering. The short chainstays provide plenty of snappy acceleration when you need to bridge a gap or distance the rider behind you. When the course gets super technical, use the internally routed dropper post to get your saddle out of the way so you can attack the features in front of you.


Racing is all about making choices in the heat of the battle so that the outcome will be in your favor. Jumping a rooted/ rocky section to save a few extra seconds or picking the right lines as the course evolves over the duration of a race will help ensure a very good race at the very least. Racing on a bike designed to get you to the finish line first is the final piece of the puzzle in your quest for the race win. The Sage Titanium Optimator is your XC weapon of choice.


Available in standard geometries or as a custom frame.  For more information please contact Sage at SageTitanium.Com or the Sage experts of Lakeside Bicycles by phone (W-F 10-7, Sat 10-6, or Sun 12-5) at 503-699-8665 or by email at Info@Lakeside-Bikes.com.

At Sage, 3/2.5 titanium is the magic material. The smooth riding alloy blends stiffness, durability and weight for the ultimate frame tubing. Titanium has a superior strength-to-weight ratio compared with steel and aluminum, and the fatigue tolerance far surpasses the other materials. Don’t fret long rain rides or brackish water crossings—3/2.5 titanium resists rust and corrosion better than any other metal tubing.

Borrowed from the mountain bike realm, the oversized 44-millimeter head tube affords phenomenal front-end stiffness and precision on the road. Press-in headset cups provide a secure interface between frame and cockpit, and the large diameter opening accepts a wide range of steerer tubes, from 1?-inch straight to 1?–1½-inch tapered and every combination between.

Classic and classy yet updated for the modern era, the T47 bottom bracket reigns supreme over press-fit alternatives. The strong interface between bottom bracket cups and the frame eliminates creaks and maintains alignment that won’t slip or wobble over time. Additionally, installation, removal and service of the design are simply superior. No punching or pressing required. Just thread it, grease it, shred it. Repeat.

Custom 3D printed titanium dropouts and chainstay yoke options are now available on all Sage bicycles. Our dropouts are SRAM Transmission/ T-Type compatible so your bike is future proofed whether you are riding road, gravel, or MTB. The chainstay yokes are designed for max tire clearance and minimal chain stay lengths to provide better acceleration and snap out of the corners. 3D printed parts are lighter and stronger than standard welded parts due to the unique nature of the printing and heat treating process. Our parts are specifically designed to meet the rigors and demands for performance oriented bikes.

Custom 3D printed titanium dropouts and chainstay yoke options are now available on all Sage bicycles. Our dropouts are SRAM Transmission/ T-Type compatible so your bike is future proofed whether you are riding road, gravel, or MTB. The chainstay yokes are designed for max tire clearance and minimal chain stay lengths to provide better acceleration and snap out of the corners. 3D printed parts are lighter and stronger than standard welded parts due to the unique nature of the printing and heat treating process. Our parts are specifically designed to meet the rigors and demands for performance oriented bikes.

Internally routed brake lines, Di2 wires, and mechanical drivetrains are now standard options on Sage frames. External brake and mechanical shift lines options are still available if requested. Please let us know in advance.

All Sage frames come with our Blasted Finish option as a base choice. You can choose either a raw titanium finish with blasted graphics, or a blasted finish with raw graphics. The unique look of titanium metal lends itself to the finish choices listed here. No worries about decals getting scuffed or the graphics fading over time. These finish choices will be for the lifetime of the bike. We also offer Cerakote, Anodize, and Wet Paint options for those clients that want to add some color and unique finishes and touches to their bikes.

Fully Customizable

Reviews