Park Tool's Event Stand is a versatile, stable, multi-purpose storage rack built to hold up to twelve bikes by the nose of the saddle. Perfect for events, races, or sidewalk storage, the ES-1 disassembles and folds easily for compact storage. It includes two height-adjustable tripod uprights, two 47” (119cm) support tubes, and one connector sleeve. The ES-1 is approximately eight feet long but can be extended in length with the use of ES-2 Event Stand Add on Kits (sold separately). • The ES-1 adjusts from 94 to 120cm (37"-47") • Horizontal width (inside to inside): 2.23 meters (87")
Park Tool's Event Stand Add On Kit extends the length of the ES-1 Event Stand (sold separately) by eight feet. It includes one height-adjustable tripod upright, two 47” (119cm) support tubes, and one connector sleeve.
Designed to elevate your bicycle to a piece of art, the Specialized wall display also features built-in platforms for your shoes and helmet. Formed from sheet aluminum, the display has a hidden steel support to provide stability, EVA foam pads to cradle the bike’s top tube, rubber feet to provide a secure placement on the wall, and a anodized black finish for durability. The display mounts via two screws to a solid load bearing structure. - Low-key design complements the bike. - Works with Tarmac, Venge, Roubaix, Amira, Allez, and other models with similar top tube slope and shape. - Holds bike, shoes, and helmet. - Easy to install.
Swagman's Hang It is a convenient and space-saving indoor bike storage solution. Easy to set up, it allows you to store two bikes anywhere in the room. - Expands to a max. height of 9 feet to brace against the floor and ceiling - Hooks can be set at varying heights and angles to hold almost any bike size or shape - Quick and easy to put up and take down
Feedback Sports' FATT RAKK Display Stand is an elegant solution for your fat bike. Set it down where you want it and roll your bike's rear wheel into the stand. That’s it! The 3-point contact locks in the wheel holding the bike upright. Simple and sweet, the RAKK works on any 3- to 5-inch wide tire without adjustment. It folds easily for storage when not in use. And, you can clip several RAKKs together to hold all your bikes side-by-side. Plus, this durable stand is made of steel and coated with durable powder paint for a lifetime of service.
Saris' Wheel Arch provides a versatile, quick way to store your bike. It adjusts easily to accommodate narrow or wide tires, either front or rear. You can also easily connect additional units to store multiple bikes. The Wheel Arch folds down for easy storage and it comes pre-assembled.
Bandit SWAT MTB storage strap. - Uniquely designed to bolt directly under a saddle with SWAT compatible mounts. - Individual compartments for a CO2 valve head, mountain tube, two-sided tire lever (included), and a 25g CO2 cartridge for compact and secure storage. - Tough, lightweight, water resistant Velcro strap. - Tube, CO2 cartridge, and nozzle not included.
Super huge Storage Hooks are big enough to accommodate fat bike wheels/tires. • Plated and vinyl dipped for long, scratch free service • 470XX Machine thread including two nuts: • Inside to inside 125mm (4-7/8") • Height inside J-bend 150mm (6")
Super huge Storage Hooks are big enough to accommodate fat bike wheels/tires. • Plated and vinyl dipped for long, scratch free service. • 471 Wood thread including two nuts • Inside to inside 125mm (4-7/8") • Height inside J-bend 150mm (6")
• Oversized hook for large MTB tires and tall aero rims • Inside width of 75mm (2.95") and 150mm (5.9") tall inside the J-bend • Made from 9.5mm wire • Wood screw thread is nominally 11.4mm outside diameter (15/32") with 7 threads per inch • Use a minimum of 11/32" drill size to pilot wood hole • Blue vinyl coated
• Park Tool Storage Hooks are perfect for hanging bikes, wheels, etc. • Vinyl coated to prevent scratching. • Wood threaded • Made from 7mm steel rod • For a pilot hole in wood, use a 1/4" or 6mm bit • Sold in pairs
Park Tool Storage Hooks are pefect for hanging bikes, wheels, etc. • Vinyl coated to prevent scratching. • Machine threaded - includes 2 nuts • Made from 7mm steel rod • Thread is a M8 x 1.25 44mm length
Page 1 of 1