Jagwire's Sealed Shift End Caps are the important housing ferrules placed on the end of housing sections to optimize your shifting. They are available in 2 types to fit most housings and they feature small rubber O-rings to help prevent moisture and grit entering the housing and fouling your shifting. These ferrules are best used with derailleur cable and housing.
- 11-Speed brake & shift cable/housing set - Special 4.1mm derailleur housing for reduced friction - Everything you need for a Campy-equipped bike in one simple kit - Fits all Campagnolo Ultra-Shift, Power-Shift, Ergopower, Time Trial and Flat bar systems - Includes 4 cables, housing & ferrules - Cable Head: Road - Diameter: 1.2 mm - End Type: Campy - Housing Diameter: 4.1 mm
$44.99 - $50.00
Jagwire's Road Pro Complete Cable Kit is the perfect way to upgrade your shifting and braking while adding some style to your bike, too, since it comes in many colors. The kit provides everything needed to replace your Shimano or SRAM shift and brake cables including Jagwire's super-smooth Teflon-coated cables and compression-resistant Kevlar-reinforced housing for dramatically improved performance. Plus, with all the small parts included in the kit it's easy to install.
Shimano Ultegra OT-SP41 housing and polymer cable derailleur set. - Polymer-coated, stainless steel inner cable reduces the sliding resistance to achieve lighter and quicker operation and is rust resistant - OT-SP41 Housing is pre-lubricated with silicone grease - Sealed end caps to minimize dirt contamination - Low friction polymer material on the cable may cause slippage at the cable fixing bolt after initial pre-stretch for the cable is performed - Diameter: 1.2mm - End Type: Shimano/SRAM - Housing Diameter: 4mm
- Pre-lubed with special polymer compatible grease - Polymer-coated inner cable reduces the sliding resistance to achieve lighter and quicker operation - Stainless steel for anti-rust protection - Low friction polymer material on the cable may cause slippage at the cable fixing bolt after initial pre-stretch for the cable is performed. Fur like material from polymer coating will not affect the performance - Ultegra grade SLR-EV Road brake cable set
SRAM's Shift Cable Kit is the right kit to have on hand so you can fix a broken cable and a nice upgrade, too. It comes with 2 1.1mm-diameter SRAM shift cables and enough SRAM 4mm-diameter compression-free housing to fit any size bicycle. The housing has a slippery liner for super-smooth shifting. You also get SRAM aluminum ferrules and cable crimps to prevent fraying.
$12.99 - $25.00
Jagwire's Stick-On Cable Guides are made of lightweight aluminum with adhesive on the bottom. The aluminum lets them conform to any shaped frame tube and the adhesive holds fast. They come with Jagwire's C-Clips, nylon cable clips that snap onto the guides to hold the cables neatly in place. You get a pack of 4.
$16.99 - $17.99
Jagwire's Inline Index/Detent Adjusters are installed by cutting the front sections of shift housing and inserting them between the two housing pieces to join them again. Once in place, the Inline Adjusters let you fine-tune the shift cable tension by hand, and even while riding, to dial-in your front and rear shifting. You simply turn the knurled center barrels on the adjusters by hand to tighten or loosen the cable tension.
$10.99 - $15.00
Jagwire's Cable Grips are adapters that make it possible to run hydraulic brake lines on bicycle frames that have housing stops that were designed for regular wire cables and standard housing sections. Once the regular cables and housing sections are removed, the Cable Grips are inserted and tightened in place in the standard frame stops. Then, the hydraulic lines are attached and securely held in place by the gripping jaw(s) of the Cable Grips. The Aluminum model accepts lines up to 5mm in diameter and the lines snap in. The Stainless model grips fully around the lines and is adjustable to fit most diameters.
$14.00 - $14.99
Jagwire's Sport Inline Adjusters are installed on your shift cable housing sections so that you can fine-tune the shift cable tension by hand (without tools). They're great for keeping your shifting dialed in. They're precision made of lightweight aluminum and nylon for easy use and durability. To install them, remove the cables and housing sections, cut the top housing sections in two and rejoin the sections with the Inline Adjusters in the middle.
$5.49 - $13.49
Sport level brake cables come in a variety of cable end setups to fit most bikes at a quality level well above normal OEM cables. - Slick cables are die-extruded for smooth operation - Pre-stretched - SRAM/Shimano mountain compatible cable end - Stainless steel construction resists corrosion - Single end cable features weld-cut for easy installation
$5.49 - $13.49
Jagwire's Road Brake Inner Wire is a high-quality brake cable made of stainless steel for excellent braking performance, corrosion resistance and durability. It comes in Campagnolo and SRAM/Shimano models and lengths to fit single and tandem bicycles.
$4.99 - $10.99
Jagwire's Shift Inner Wire is a high-quality shift cable made of stainless steel for excellent shifting performance, corrosion resistance and durability. It also comes in lengths to fit single and tandem bicycles.
Jagwire's Double-End Straddle Cable is a replacement straddle cable (also called a crossover or transverse cable) for cantilever brakes.
- Vision Aero/reverse brake lever specific brake cable - Replacement cables that only work with Vision reverse brake levers - Sold individually
Jagwire's V-Brake Boot covers and seals the points where the the cable on your V-Brakes, linear-pull and direct-pull brakes enter the noodle. It's made of flexible rubber to seal the cable and help keep dirt, grit and moisture from entering. It keeps your cables and brakes working nice and smooth and ensures your cables last as long as possible. You get a bag of 10.
Page 1 of 1