Filter By:
- Sport/Performance (24)
- Gravel (18)
- Touring (3)
- Road Frames (29)
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
- Show More Model Years
- Show Fewer Model Years
Road
The bike has about 100 miles of riding over the course of 3 rides as we tested the Campy groupset and wheels. It has never been crashed or laid down in any way. The frame is a slightly modified 56cm geometry with only the headtube being 13mm taller than a stock frame. This does increase the Standover Height and the Stack a little bit, but not by much.
A study in refined ruggedness—this is one bike to rule them all. Named for the road that brought pioneers over the Cascade Mountains on the final leg of the Oregon Trail, the Barlow is built for epic adventures. It draws on the aggressive geometry and precise handling of our award-winning Skyline road bike, while also maintaining the comfort and toughness of an off-road machine. Some might label this design “adventure rider,” “gravel racer,” or “endurance road,” but Sage Titanium’s versatile frame transcends those conventional categories. No, the Barlow relishes the rigors of the dirt while begging for the speed of the road. It loads up for a tour and can handle the long haul. It does not compromise, and it flashes with the class of titanium. It does it all.
All of our demo/ show bikes carry our limited lifetime warranty so you can rest easy at night knowing your frame is covered should something happen to it. Complete bikes are tuned up prior to shipping. This includes new chain, bar tape, and brake pads as necessary. Complete bikes ship out within 7-10 business days after your order has been confirmed.
Please note: This bike was custom painted for the 2023 MADE bike show and was intended as a launch platform for the Campagnolo Super Record Wireless group. The frame is custom cerakoted in an Armor Black with a polish gloss over the logos to give them extra pop. The 2 small Italian flags are an homage to the Campagnolo groupset and the wheels on the bike. This is a one-of-a-kind artwork scheme.
For more information please contact the Sage Titanium experts of Lakeside Bicycles by phone (W-F 10-7, Sat 10-6, or Sun 12-5) at 503-699-8665, or by email at Info@Lakeside-Bikes.com.
The Shimano GRX Limited Edition 2X Mechanical drivetrain is brand new. As is the Ultegra chain, 11-34 cassette, Easton EA70 handlebar, and the Lizard Skins DSP bar tape.
The rear brake line is internally routed through the downtube only. The brake line exits near the bottom of the downtube and runs externally along the top of the non-driveside chainstay. The bike is dropper post ready as well. If you wanted to run a dropper post, the dropper line would follow the brake line entering and exiting the downtube. After it exits the downtube, it would be visible for a short section before entering the seat tube and running internally up to the internally routed seatpost itself.
This is not another gravel bike. The Sage Titanium Storm King is a catalyst to new adventures. It’s a drop-bar beast designed to fuel your exploration, taking you deeper while getting increasingly more remote with every pedal stroke. The Storm King is not only designed for the bike packer who tackles multi-day adventures like the Oregon Trail Gravel Grinder, but also for the gravel racer who looks to conquer events like the Unbound or Grinduro. Storm King is a rock-gobbling animal with a geometry to keep the rider more comfortable on technical terrain.
Named after the ribbon of singletrack outside of Bend, Oregon, Storm King is ready to get shreddy on tires sizes up to 700x50mm. Utilizing a curved seat tube to decrease the length of the chainstays while maintaining maximum tire clearance, the Storm King is able to snap to acceleration with minimal effort. The Storm King touts three bottle cages, front and rear fender mounts, and bosses for a bolt-on food bag. Of course, our patented Cable Clip System ((US Patent No. 9,545,975) is designed into the bike to ensure you have as much versatility with your drivetrain choice as you do your riding adventures.
All of Sage's demo/ show bikes carry our limited lifetime warranty so you can rest easy at night knowing your frame is covered should something happen to it. Complete bikes are tuned up prior to shipping. This includes new chain, bar tape, and brake pads as necessary. Complete bikes ship out within 7 business days after your payment has been confirmed.
Please note: This is a demo Storm King that was used for media reviews and test rides as it was one of the early generation of frames Sage produced. The geometry is Sage's V1 geometry, so please refer to the attached geo chart for accurate specs. The frame has been buffed and refinished with fresh decals with a fresh coat of wax on the frame as well. The bike has been tuned up from top to bottom so it is ready to roll. For more information please contact the Sage experts of Lakeside Bicycles by phone (W-F 10-7, Sat 10-6, and Sun 12-5) at 503-699-8665 or via email at Info@Lakeside-Bikes.com.
The geometry on this bike is Sage's new “Aggressive Geometry” where they prioritize toe clearance with a longer top tube and a shorter stem. The effect generates a quick handling bike when the corners get tight, but a bike that can also remain stable at high speeds on rough descents due to the longer wheelbase of the bike.
This bike HAS NEVER BEEN RIDDEN! It has been hand carried to a few shows but Sage has never mounted pedals on it and it has not even been rolled to the end of the shop.
The geometry is based on a 56cm Storm King geometry but slightly modified with a taller headtube and a longer top tube. It will fit riders from 5’9 to 6’0. We can adjust the stem length if necessary for your fit.
This is not another gravel bike. The Sage Titanium Storm King is a catalyst to new adventures. It’s a drop-bar beast designed to fuel your exploration, taking you deeper while getting increasingly more remote with every pedal stroke. The Storm King is not only designed for the bike packer who tackles multi-day adventures like the Oregon Trail Gravel Grinder, but also for the gravel racer who looks to conquer events like the Unbound or Grinduro. Storm King is a rock-gobbling animal with a geometry to keep the rider more comfortable on technical terrain.
Named after the ribbon of singletrack outside of Bend, Oregon, Storm King is ready to get shreddy on tires sizes up to 700x50mm. Utilizing a curved seat tube to decrease the length of the chainstays while maintaining maximum tire clearance, the Storm King is able to snap to acceleration with minimal effort. The Storm King touts three bottle cages, front and rear fender mounts, and top tube bosses for bolt-on food bags. All that, plus internal cable routing for the mechanical shift lines, rear brake, and dropper post for an ultra-clean look. Lastly, this bike includes a UDH derailleur hanger for ease of replacement should the need ever arise.
All of Sage's demo/ show bikes carry our limited lifetime warranty so you can rest easy at night knowing your frame is covered should something happen to it. Complete bikes are tuned up prior to shipping. This includes new chain, bar tape, and brake pads as necessary. Complete bikes ship out within 7-10 business days after your payment has been confirmed.
Please note: This bike is Sage's 2022 Chris King show bike showcasing the new Midnight color that Chris King launched that year. This bike features their “galaxy” paint scheme and was hand painted in multiple color layers of cerakote. The frame is cerakoted from the head tube to about halfway back on the frame where it transitions to a blue anodize and blasted titanium finish to give the bike its unique look. This is a one of a kind piece of artwork that will not be duplicated. For more information please contact the Sage experts of Lakeside Bicycles by phone (W-F 10-7, Sat 10-6, and Sun 12-5) at 503-699-8665 or by email at Info@Lakeside-Bikes.com.
The idea behind this build was Monster Gravel and uses Sage's new “Aggressive” V2 geometry. As such, the 700×50 tires are absolutely massive on the deep dish Enve 4.5AR wheels with Chris King R45D hubs. The bike uses our 3D printed Gravel+ yoke which means it can accept tires up to 650×2.4”. The max chainring size is a 44T 1X setup. The Zipp XPLR bars provide a very comfortable compact drop with a nice flare for when the trail gets tough, while we also left enough headset spacers below the stem so that you can fine tune the fit for you as opposed to cutting the stem and just slamming it down with no hope of adjustability.
The GRX Limited Edition drivetrain is mechanical and the cassette is an XT 11-42 for a super wide range. The tires are some very special IRC Racing Team tires. These 700×50 tires were for the race team only as the tire was being developed into what would become the IRC G-Claw tires.
Lastly, this bike is setup with UDH dropouts for ease of derailleur hanger replacement should the need ever arise.
This is not another gravel bike. The Sage Titanium Storm King is a catalyst to new adventures. It’s a drop-bar beast designed to fuel your exploration, taking you deeper while getting increasingly more remote with every pedal stroke. The Storm King is not only designed for the bike packer who tackles multi-day adventures like the Oregon Trail Gravel Grinder, but also for the gravel racer who looks to conquer events like the Unbound or Grinduro. Storm King is a rock-gobbling animal with a geometry to keep the rider more comfortable on technical terrain.
Named after the ribbon of singletrack outside of Bend, Oregon, Storm King is ready to get shreddy on tires sizes up to 700x50mm or 650×2.4?. Utilizing a curved seat tube to decrease the length of the chainstays while maintaining maximum tire clearance, the Storm King is able to snap to acceleration with minimal effort. The Storm King touts three bottle cages, front and rear fender mounts, and bosses for either bolt-on food bags. All that, plus internal cable routing for the rear brake, rear derailleur, and the dropper post for an ultra-clean look.
All Sage demo/ show bikes carry their limited lifetime warranty so you can rest easy at night knowing your frame is covered should something happen to it. Complete bikes are tuned up prior to shipping. This includes new chain, bar tape, and brake pads as necessary. Complete bikes ship out within 7 business days after your payment has been confirmed.
Please note: This is a custom Storm King that was built for a customer that had to cancel their order due to a family emergency. The geometry of the frame was based on a 58cm Storm King and then modified to fit the customer. Please see the attached geometry chart for exact measurements. There is no Storm King logo on the top tube at the original customer’s request. All components on this bike are brand new with the exception of the Cane Creek eeWings, Praxis Chainring, and PNW Coast Dropper post. These parts were on a prior show bike that was stripped and sold. The cranks have some scuffs, while the dropper post was used a few times but is otherwise is in excellent shape. For more information contact the Sage experts of Lakeside Bicycles by phone (W-F 10-7, Sat 10-6, and Sun 12-5) at 503-699-8665 or via email at Info@Lakeside-Bikes.com.
This was the second Storm King we ever produced as the first was used as a prototype for testing and debuted at the Enve builder show earlier that year. The frame, fork, stem and bars are all hand painted using wet paint. This is not a cerakote or anodize finish. There is a clear gloss over the paint for protection purposes, but this is still wet paint. The actual painting of the frame and the detail work took over 20 hours to complete. The stem, bars, and fork were an additional 10 hours beyond the frame. This was all done by hand by a single painter. We do have the custom touch up paint that will be included with the purchase of the bike.
This bike HAS NEVER BEEN RIDDEN! We have never mounted pedals to it and it has only been shown at Sea Otter 3 times and the original King show just the once. Otherwise, it has been securely stored in our shop for all of these years.
This is a stock 56cm geometry when we originally created the design. The geometry is our V1 geometry, so please refer to the geo chart at the bottom of the page for accurate specs. It is closer to a Barlow in terms of top tube length but with a slightly more upright riding position for more technical riding. While it does clear 700×50 tires, be mindful of toe overlap as 700×45 tires would be better suited for off road riding. The Dropper line does have a little bit of exposure as it transfers from the down tube to the seat tube, while the brake line does run externally on the top of the non-driveside chainstay as this was before we were using T47 BB’s for internal routing. Lastly, the Owl logo and the MADE IN USA flag are both decals as we were still using decals at that time and wanted to showcase them in some way.
This is not another gravel bike. The Sage Titanium Storm King is a catalyst to new adventures. It’s a drop-bar beast designed to fuel your exploration, taking you deeper while getting increasingly more remote with every pedal stroke. The Storm King is not only designed for the bike packer who tackles multi-day adventures like the Oregon Trail Gravel Grinder, but also for the gravel racer who looks to conquer events like the Unbound or Grinduro. Storm King is a rock-gobbling animal with a geometry to keep the rider more comfortable on technical terrain.
Named after the ribbon of singletrack outside of Bend, Oregon, Storm King is ready to get shreddy on tires sizes up to 700x50mm. Utilizing a curved seat tube to decrease the length of the chainstays while maintaining maximum tire clearance, the Storm King is able to snap to acceleration with minimal effort. The Storm King touts three bottle cages, front and rear fender mounts, and bosses for either bolt-on food bags or bolt-on frame bags. All that, plus internal cable routing for the rear brake and dropper post for an ultra-clean look. Of course, our patented Cable Clip System ((US Patent No. 9,545,975) is designed into the bike to ensure you have as much versatility with your drivetrain choice as you do your riding adventures.
All of Sage's demo/ show bikes carry their limited lifetime warranty so you can rest easy at night knowing your frame is covered should something happen to it. Complete bikes are tuned up prior to shipping. This includes new chain, bar tape, and brake pads as necessary. Complete bikes ship out within 7 business days after your sale has been confirmed.
Please note: This is their 2019 Chris King show bike that featured the launch of the Purple (AKA “Violet”) colorway. For more information please feel free to contact the Sage experts of Lakeside Bicycles by phone (W-F 10-7, Sat 10-6, or Sun 12-5) at 503-699-8665 or by email at Info@Lakeside-Bikes.com
"Seven of the last 10 Tours de France have been conquered on a DOGMA, and the latest generation is now ready to continue that legacy of success. This is the culmination of all of our skill and experience, a masterpiece of engineering that offers advancements in handling, comfort, and aerodynamics all wrapped in a package that can climb, descend, and sprint with equal flair. Whatever the road throws at you, the DOGMA F is always the right bike."
When you have a frame that delivers not only incredible efficiency in lab and wind tunnel tests, but also regularly carries top riders to the podium throughout the road race calendar, improvements tend to be incremental refinements developed through even more advanced analysis and real world testing. In it's day the Pinarello Dogma F12 frameset was the benchmark, which didn't give the deranged geniuses at Pinarello even one moment's pause in their perpetual quest to build the world's next super bike.
Pinarello has long stated that weight is less an issue than the balance of aero efficiency, maximized power transfer, superior handling, and a more forgiving ride- but when faced with the excellence of the Dogma F12, it became clear that by assessing the whole assembly of the integrated cockpit and frameset, the overall set-up could be made lighter as well. By focusing on the seatpost, handlebars, and fork, as well as the frame, they were able to make the entire frame system 9% lighter than the F12 Disk.
Enter the Dogma F Disk. As a system, the Pinarello Dogma F Disk saves upwards of 265 grams compared to it's predecessor, while simultaneously gaining 12% stiffness around the bottom bracket. Reducing weight equals watts saved, but what is incredible is that the frame system weighs so little without compromising aerodynamics, handling, or ride quality. In fact, the Dogma F Disk has a lower drag than the Dogma F rim brake frame- a first for Pinarello.
Much of the disc brake aero advantage comes with the development of the new Onda fork for the Dogma F. The forks profile and cross sections improve fork and wheel integration, aerodynamically speaking, in order to smooth the air over the leading edge of the bike. Add in the Flatback aero shape design with it's truncated aerofoil for aerodynamic advantage, that is compliant to the 3:1 UCI rule, and you have excellent aero performance and low lateral wind resistance.
Beginning with the Dogma FPX AK61 Magnesium and continuing through the F10 and F12 The highest quality, most advanced materials have always been employed in Dogma-series framesets. The F Disk features the superlative properties of Torayca's T1100 1K Dream Carbon with Nanoalloy Technology. By refining the frame shapes and designs in the computer and wind tunnel, some weight directly came off the frame itself, while making several marginal aero gains that deliver a 4.8% improvement in aero efficiency over the F12 Disk, delivering a potential 2.6 watts saved at 50 km/hour. A modest but real gain that advances the demonstrated excellence of the F12 Disk. When you factor in the dropout to dropout Asymmetric engineering and design, which has long been proven effective for optimal power transfer, impeccable tracking, incredible handling at speed or while descending, and you have true cycling transcendence.
Available for Electronic Shifting Only.For more information we can be reached at 503-699-8665 or at info@Lakeside-Bikes.com .
Named for the Frank Zappa/Mothers of Invention song (appears on the 'B' side of the CD release of "Absolutely Free") and for Dario's mother, Big Leg Emma is based on the Marcello with the addition of oversized tubes (22mm chainstays vs. the Marcello's 18mm) and internal re-enforcing gussets. It is, by far, the stiffest steel frame in Dario's stable and is designed for Clydesdales or over-quadded crit specialists. If you need a 60 or 62cm frame, it is probably your baby.
After you hear it described, the design elements of the Big Leg Emma are straight forward: One, that wider diameter tubes are less prone to flexing under load. Two, the down tube and the chainstays directly effect bottom bracket deflection. It is all pretty obvious until you add a sprinkle of Pegoretti genius.
To get there Dario took a page out of Falerio Masi's book (he used a similar technique to stiffen the chainstays of track bikes during the 70's) and added gussets (stiffeners) to the oversized downtube. Prior to welding up the frame, Dario laser cuts several small grooves into either side of the downtube. He then brazes in horizontal anti-flex plates and finishes it off by brazing ornamental covers over the incisions. At the end of the day Dario achieves his goal of an uncompromisingly stiff race frame without sacrificing vertical compliance or aesthetics.
The Big Leg Emma is available only by special order, We ask for a full deposit in return for which I will gently annoy the people at Gita on a weekly basis until your baby arrives. I have no idea how long it is going to take to get here (18 to 30 months is a guess and probably wrong) but I guarantee it will be worth the wait. Should you come to the reasonable decision to own a Pegoretti Big Leg Emma, please allow the enthusiasts at Lakeside Bicycles to offer your their assistance. Our hours are Pacific Time 10-7 W-F, 10-6 Sat, 12-5 Sun, you can e-mail us at info@lakeside-bikes.com or, if you would like to learn much, much more about Dario Pegoretti and his frames, just click this link.
Named after a Nick Drake song as covered by the jazz pianist Brad Mehldau, Day Is Done is the most recent addition to Dario Pegoretti's lexicon of steel framesets.
The Day is Done was developed as a performance lugged steel frame employing classic construction techniques and the benefits of oversized tubing. The headtube is 7mm shorter than a TIG-welded frame, though a "ring" can be added to the upper lug to increase it's height if requested.
Heat treated Columbus Spirit Niobium tubing is based on the tubeset designed for the Marcelo with modifications to optimize it for lugged construction.. The Cadnezia oversized lugset was developed in a collaboration between Dario and Darrell McCulloch of Llewellyn Bikes in Australia. The rear dropout attachment is amended with a hollow tube through the stays offering an increased surface for brazing and providing a striking visual effect. The brazed tube also increases lateral rigidity of the chainstay at the critical juncture with the dropout
Building lugged frames is a more gentle and time consuming process than TIG welding. In addition to cutting and milling, each tube must be fitted to a hand tapered lug and then, patiently silver brazed together at relatively low (600o C to 900oC) temperatures. Due to the low temperatures and reinforcing of the lugs, this process results in an extremely strong and readily repairable frame. In the hands of a superior builder working without time constraints, lugged steel represents the pinnacle of bicyle frame esthetics
“There is a reason for the “holes” in the stays at the dropouts. The small cylinders that are brazed into the stays give more surface area to braze the dropout. Since Dario likes to use non-tapering stays, he can’t use conventional dropouts as there wouldn’t be enough contact area. This is an alternative to using the “hooded” dropouts he uses on the Marcelo and Responsorium that he feels fits better with a lugged frame." -Nelson Frazier, Gita Sporting Goods
Pegoretti's Duende takes its name from a concept in Spanish art that deals with a heightened state of emotion and authenticity typically associated with Flamenco. While not quite as stiff as the Round, Mxxxxxo or Responsorium, Duende’s aesthetic is more classic than esoteric. The Duende is well suited for someone seeking a comfortable all-day bike that does everything well. The tubing – Columbus ZONA – is still “oversized” in the front triangle to optimize stiffness, but with its rear triangle boasting traditional, tapering rear stays and more conventional dropouts for improved comfort. We offer the Duende as a standard or Cycle Cross frameset, or you can custom order in the geometry of your choice in any of the currently available color schemes includeing Panel, Ciavete or solid colors. Should you come to the reasonable decision to own a Pegoretti Duende, please allow the enthusiasts at Lakeside Bicycles to offer your their assistance. Our hours are Pacific Time 10-7 W-F, 10-6 Sat, 12-5 Sun, you can e-mail us at info@lakeside-bikes.com or, if you would like to learn much, much more about Dario Pegoretti and his frames, just click this link.
Towards the end of every summer, when the swallows start to think about their journey south, Pegoretti builds Duende CX frames. However, unless you’re a fan of cantilever brake, wide-tire cyclocross frames, the CX may have passed you by.
After fielding requests for an update to this beloved Pegoretti frame, they decided to add a new model to the Duende family, the Duende Rock & Roll. The new frame blends the all-terrain heritage of the CX with the spirit of their road frames and takes off for pastures new with the versatility to ride on any surface.
The Duende Rock & Roll features custom Columbus XCR stainless steel tubing, disc brakes, and a new carbon fibre fork, 'Piron', that accepts up to 40mm of tyres. It's a radically different design to our Falz fork, necessarily so, because the Rock & Roll is built for versatility.
As an alroad frame, the Duende Rock & Roll blends superb responsiveness with telling comfort and the modularity of wider tyres. All-weather optional add-ons like mudguard mounts allow the frame to shoulder the worst conditions without skipping a beat. However, with the option of rack mounts and a switch to flat bars, the Duende Rock & Roll turns into a fast city commuter. For those who look beyond the tarmac, the Duende Rock & Roll equips the modern explorer for the fields, trails and generally less pristine conditions that come with following your curiosity, wherever that may lead.
Lakeside Bicycles offers the Duende Rock and Roll as a frameset and would be happy to consult with you about a complete bike or a parts package to compliment your Pegoretti frameset. The Duende Rock and Roll comes with a Piron fork and a custom designed Chris King D11 headset. It takes a 31.6 seatpost and a 33.6mm front derailleur clamp. The bottom bracket is English threaded. The Duende Rock and Roll is manufactured in standard geometries in 1cm increments from 45 to 63cm as well as by special order, in custom geometries. Pegoretti frames can be ordered in any current design including Panel, CIavete, or in solid colors. Duende Rock and Roll's can be ordered set up for mechanical road, mechanical CX, or wireless; and to include fender and rack mounts (the Piron fork already has them).
Should you come to the reasonable decision to own a Pegoretti Duende Rock and Roll, please allow the enthusiasts at Lakeside Bicycles to offer your their assistance. We can be reached by phone at (503)699-8665, our hours are Pacific Time 10-7 W-F, 10-6 Sat, 12-5 Sun, you can e-mail us at info@lakeside-bikes.com or, if you would like to learn much, much more about Dario Pegoretti and his frames, just click this link.
"Because even intellectuals fall in love at least three times in their lifetimes."
Replacing the 8:30 AM (another name inspried by a Zappa tune) in 2006, Pegoretti's Love#3 was an aluminum rendering of the Marcelo. Being aluminium, Dario considered the Love #3 to be a mercenary frameset of sorts -- it's a "pure race bike" that "50% of the people want, and 70% of them don't need." The oversized chainstays (30mm) and large diameter main tubes of Columbus XLR8 Scandium were custom drawn to Dario's specifications. The tubes were relatively thick-walled, in deference to Dario's concern with the ride quality and longevity of his frames rather than with a mindless quest to shave grams (though, at 1225g in the 54cm frame, we were able to break the UCI's weight limit without breaking a sweat). As usual, the attention to detail is mind blowing. .
Beautiful as it was, the Love #3 was well suited for hard riding and racing. Owners report that, unlike any other alloy frame they have known, the Love#3 had a Marcelo-like ride: smooth, comfortable, predictable on descents and very fast. All exactly what you would expect in a race specific frame.
The new Love#3 respects the original's killer feel and shares most of it's design features, but boasts a larger diameter headtube of 43mm, up from 39mm on the original. The new headtube is stiffer and blends better with the rest of the frames custom, oversized Columbus 7.5 Alloy tubing. Along with improved performance, the larger headtube necessitated an entirely new D19 headset designed as a collaberation between Chris King and Pegoretti, and based on the venerable Chris King NoThreadSettm.
From his super-human welds and museum quality finish to the frame's aggressive stance everything is a bespoke reflection of the artist's vision. Unique among Pegorettis the Love#3 features removable derailleur hanger bolted to oversized, hooded alloy dropouts. It uses an Italian threaded bottom bracket, a 31.6mm seatpost and includes a Chris King D19 1 1/8" headset and a Falz fork
Should you come to the reasonable decision to own a Love#3 please allow the enthusiasts at Lakeside Bicycles to offer your their assistance. Our hours are Pacific Time 10-7 W-F, 10-6 Sat, 12-5 Sun, you can e-mail us at info@lakeside-bikes.com or, if you would like to learn much, much more about Dario Pegoretti and his frames, just click this link.
Few frames touch the heart-strings of steel afficianados as the Luigino. Through the Luigino Dario pays homage his favourite builders of those bygone days - Luigino Milani and Mario Confente.
One modern touch is, instead of sticking with the smaller diameter tubes of past decades, Pegoretti uses slightly oversized tubes to offer superior stiffness and responsiveness. One of the most striking details of the Luigino is its double-plate crown steel fork. Forks with box-style crowns offer the ultimate responsiveness to rider input, and the Luigino's double-plate design is a marvel of modern machining, bringing the box crown to a new dimension of beauty.
Available in very limited and unpredictable sizes or by special order. 27.2 seatpost, 28.6 front derailleur, 1" stearer. The Luigino is available in any current color scheme including Panel, Ciavet, or solid colors, though no one at lakeside can imagine why you would choose anything other than Faema. Pegoretti also offers the Luigino with track fork ends at no extra cost: if you were looking for the ultimate fixed/single speed frame, your search has ended.
Should you come to the reasonable decision to own a Pegoretti, please allow the enthusiasts at Lakeside Bicycles to offer your their assistance. Our hours are Pacific Time 10-7 W-F, 10-6 Sat, 12-5 Sun, you can e-mail us at info@lakeside-bikes.com or, if you would like to learn much, much more about Dario Pegoretti and his frames, just click this link.
The Marcelo is the flagship steel bike from the most revered frame builder of his generation, it is what Dario thinks a steel race bicycle should be. Should you ever find yourself in Plato's cave, the shadows of steel road frames cast upon the wall, are cast from a Marcelo.
Round tubes attached to round tubes with angelic welds, the Marcelo you hold in your hands is merely the obvious manifestation of Dario's genius. Dig deeper and you will find the fanatic attention to detail that has driven the tubing manufacturers at Columbus mad. Every element of design and manufacture brings his vision exactly to life. Each custom drawn tube is a little bit wider here and somewhat thinner there such that each Marcelo manifests a dreamlike ride quality worthy of it's Pegoretti badge.
The Marcelo is made from Dario's own version of the Columbus heat-treated LIFE tubeset, the top steel alloy currently available for bicycle construction. His oversized version of LIFE makes the race-inspired ride of the Marcelo possible. It is stiff and responsive with the snappy, lively feel and results in a smooth and damped ride combined with taught, stiff responsiveness under power. The Marcelo gives up nothing when compared to other super premium frames no mater of what material.
The Pegoretti hooded dropouts are intricately machined stainless steel, stunning to behold and capable of absorbing hard wheel-in, wheel-out abuse. The chainstays are thick (18mm) and taper gracefully toward the bottom bracket to allow for stiffness and adequate tire clearance.
The Marcelo comes with Pegoretti's Falz full carbon fork. After an an exhaustive search failed to find any fork on the market to meet his specifications, Dario designed and Columbus made his own.
And the finish! - that famous Pegoretti paint. Hand applied with the same mystical attention to detail as the rest of the manufacturing process, if you don't like it, Picasso is probably beyond you as well.
We offer the Marcelo as a standard frameset or you can custom order in the geometry of your choice in any of the currently available color schemes including Panel, Ciavete or (though God knows why you would) solid colors. We would be happy to consult with you about a complete bike or a parts package to compliment your Pegoretti frameset. The Marcelo comes with a Falz fork and a custom designed Chris King D11 headset. It uses a 31.6 seatpost and comes with a custom, Pegoretti designed derailleur clamp. The bottom bracket is Italian threaded.
Should you come to the reasonable decision to own a Marcelo, please allow the enthusiasts at Lakeside Bicycles to offer your their assistance. Our hours are Pacific Time 10-7 W-F, 10-6 Sat, 12-5 Sun, you can e-mail us at info@lakeside-bikes.com or, if you would like to learn much, much more about Dario Pegoretti and his frames, just click this link.
Inspired by the Argentine musician Dino Saluzzi's album of the same name, the Responsorium blends custom drawn Columbus XCR stainless steel tubing with Pegoretti's signature hooded dropouts, 16mm cylindrical non-tapering stays, thinner tube walls and more extensive butting made possible by XCR's superior strength (20% stronger than Columbus Niobim Spirit) to produce the lightest (100g less than the Marcelo), most vertically compliant frame in the Pegoretti line-up.
The 55cm frame comes in at a respectable 1678g and the Falz fork at 425g. Each frame comes with a Falz fork painted to match the base frame color and a Chris King D11 headset. The Responsorium takes a 31.6 mm seatpost and a comes with a custom 32mm front derailleur clamp. As with all caliper Pegorettis, the Responsorium comes standard with an Italian threaded bottom bracket. Due to the constraints imposed by hydraulic hose routing, the disc version is exclusively available with an English bottom bracket. XCr is being run exclusively for Pegoretti, so it will remain in short supply, if you can't find what you are looking for in existing inventories, we suggest you order now. Lead times are over six months and there is little or no chance your dream frame will "just show up".
Both Caliper and disc versions of the Responsorium are the only Pegorettis with a weight limit, if you are over 120kg (264lb) or plan on becoming over 120kg (264 lb), you will need to consider something else. The Responsorium is available in both caliper and disc versions in 1cm increments from 48 to 60cm in standard Pegoretti geometires, or you can custom order in the geometry of your choice in any of the currently available color schemes including Panal, Ciavette, or (though we cannot imagine why you would) in a solid color.
Should you come to the reasonable decision to own a Pegoretti Responsorium, please allow the enthusiasts at Lakeside Bicycles to offer your their assistance. Our hours are Pacific Time 10-7 W-F, 10-6 Sat, 12-5 Sun, you can e-mail us at info@lakeside-bikes.com or, if you would like to learn much, much more about Dario Pegoretti and his frames, just click this link.
The Round, Pegoretti's latest frame, came to life over long lunches at the Bottega, and even longer deliberations by the espresso machine about it's place in the Pegoretti line-up.
For some time the Pegoretti community has been asking for the Bottega to take the exceptional performance of the Marcelo and develop it into a new model in stainless steel. The Round is their response: an incredibly reactive frame built for the rider seeking a no-compromise steel speed machine.
The Round blends bespoke Columbus XCR tubing with 3D printed stainless steel dropouts, and a new rear triangle and brake bridge design that affords superior lateral stiffness and responsiveness.
Named in honor of Dario Pegoretti's sign-off handle by which he was known to friends and customers alike, the Round features an original graphic called "Texas Flood", inspired by Dario's love for the music of Stevie Ray Vaughan, the city of Austin, Texas, and a certain colorful cowboy belt he brough back with him from that same city.
We offer the Round as a standard caliper or disc frameset or you can custom order in the geometry of your choice in any of the currently available color schemes including Panel, Ciavete or (though God knows why you would) solid colors. We would be happy to consult with you about a complete bike or a parts package to compliment your Pegoretti frameset. The Round comes with a Falz fork and a custom designed Chris King D11 headset. It uses a 31.6 seatpost and comes with a custom, Pegoretti designed derailleur clamp. The bottom bracket is Italian threaded for the caliper frame or, due to constraints resulting from hydraulic hose routing, English threaded for the disc version.
Should you come to the reasonable decision to own a Pegoretti Round, please allow the enthusiasts at Lakeside Bicycles to offer your their assistance. Our hours are Pacific Time 10-7 W-F, 10-6 Sat, 12-5 Sun, you can e-mail us at info@lakeside-bikes.com or, if you would like to learn much, much more about Dario Pegoretti and his frames, just click this link.